日韩精品免费观看99_久热这里精品国产_歐美日韓高清不卡一區二區三區_国产一级毛片电影国语版_91香蕉视频免费版_AV天堂岛在线观看_成人在线免费观看亚洲_初见直播app最新_亚州一级毛片在线_动漫 亚洲 自拍

Stainless steel vacuum pump for people's work has brought convenience, deeply loved by people, for its knowledge of oil discharge, how much do you know about it, the following is how to discharge stainless steel vacuum pump?

1. If you want to drain all the oil in the stainless steel vacuum pump box, you can screw off the oil drain plug at the bottom of the box to drain the oil.

2. When the stainless steel vacuum pump is discharging oil, the height between the liquid level and the top plate of the oil tank shall not be more than 30mm, so as to ensure the lubrication and cooling of the bearings in the pump. When the volume of the jack working chamber is too large, another oil tank shall be set up to ensure that the minimum height of the liquid level after the external oil discharge is not less than 100mm, so as to avoid being sucked out.

3. The oil tank and oil filter should be cleaned after 500h operation of speed regulating hydraulic stainless steel vacuum pump for the first time. The oil quality shall be tested by visual inspection and laboratory test. When the oil quality deteriorates, the oil shall be replaced in time. Oil tank and oil filter must be cleaned at the same time when changing oil. If there are metal chips or water in the oil, find out the cause and remove the fault.

4. In a short period of time when the liquid level drops, the bearing is lubricated by attached oil and splashing oil from plunger spring. The oil filter of oil tank and oil filter under pump are made of 230 mesh / inch copper mesh. The oil filter net should be cleaned frequently to prevent blockage. When in use, the oil temperature of oil tank should not exceed 60 ℃, and appropriate measures should be taken to cool it if necessary.

Stainless steel vacuum pump how to discharge oil, I believe you understand, will bring you help, for the above knowledge for you to introduce this.